Pretraživanje artikala
Napredna pretraga
Pretraži

Naziv proizvoda

Taylor SB1-X SolidBody Classic. Single Cutaway

Taylor SB1-X SolidBody Classic. Single Cutaway
[klikni na sliku za uvećan prikaz]
Ovaj proizvod trenutno nije dostupan.
 
Detaljnije o cenama

Garantovano najniže cene

Ukoliko pronađete povoljniju ponudu za ovaj instrument, dobićete ga od nas jeftinije za 10% od razlike u ceni!

Opis proizvoda:

The Taylor solidbody electric guitar has arrived! Featuring original design pickups, a sleek all-aluminum bridge, fresh body design, proprietary neck-to-body construction, and unique switching capabilities, Taylor's innovative imprints are all over their Classic Electric Guitar.

The unique Taylor-designed pickups are the foundation the Taylor solid bodies are built on. The Classic is loaded with 3/4-size humbuckers featuring a new type of magnet and special winding process. The combination creates vintage humbucker sound with the power and dynamic range of modern pickups.

Five pickup settings with carefully chosen voicings give you a great range of tones:
1) Neck pickup
2) "Skinny neck tone"-two inside coils from both pickups wired in parallel
3) "In-between rock tone"-both coils of neck pickup combined with the inside coil of bridge pickup for classic bright single-coil tone with the added fullness of neck tone. Great for semi-distorted amp setting.
4) Fat single-coil-two inside coils from both pickups in series (north from neck and south from bridge) creating, in effect, a 4" humbucker.
5) Bridge pickup


The swamp ash body is beveled on the back, sides and in the cutaway so you're always playing in comfort and able to easily reach the upper frets. The maple neck features the single bolt T-Lock™ neck joint that pulls the neck into the body. The simple yet ingenious jigsaw joint shape provides a set neck feel and accurate intonation.

The bridge, also Taylor-designed, is amazing smooth across the top. It looks and feels clean and classy. No exposed adjustment screws to clutter the looks or get caught on.

Even the Classic's knobs are a departure from standard fare: elegant looks with a lipped edge that allows great one-finger control. Sweaty hands? Taylor includes rubber O-ring grips that slip over the knobs.

For years, Bob Taylor was asked if they were going to build a solid body electric, and for years, the answer was no. Bob's thinking was simple: he wasn't going to build a solidbody electric unless he felt there was a real reason to. In other words, he wouldn't put the Taylor name on a guitar that was just another version of what already existed.

For this electric guitar to happen, it had to be innovative, unique and worthy of a place alongside the guitars that electric guitar players have loved for generations. When the design group at Taylor invented new pickups and Bob heard them, he knew the time had come. Starting with the pickups, each element of this solid body was designed from the ground up. The ingenuity that Bob Taylor insisted on resulted in the creation of an electric guitar that's sure to inspire and well-equipped to impress.

Karakteristike:

Model Name
SolidBody Classic (SB1-X & SB2-X)
Colors
Trans White
Titanium Pearl
Lava Red
Jewelescent Orange
Purple Flake
Blue Metallic
Viper Blue
Blue Steel
Sage Green
Sublime
Magenta Pearl
Tobacco Sunburst
Natural
Trans Red
Black
Body
Solid Swamp Ash (Satin Finish)
Neck
Maple (Satin Finish)
Fretboard
Ebony, 12'' Radius (241mm)
No. of Frets
22
Cutaway
Single or Double
Controls
Volume
Tone: Traditional control for first two-thirds, last third peaks the mids
Pickup Switching
2 Mini Humbuckers/5-way switch
Position 1 Neck pickup
Position 2 Inside coils of neck and bridge in parallel
Position 3 Neck pickup with inside coil of bridge
Position 4 Inside coils of neck & bridge in series
Position 5 Bridge pickup

2 Full-size Humbuckers/5-way switch
Position 1 Neck pickup
Position 2 Inside coils of neck and bridge in parallel
Position 3 Neck pickup with inside coil of bridge
Position 4 Inside coils of neck & bridge in series
Position 5 Bridge pickup

3 Single Coils/5-way switch
Position 1 Neck pickup
Position 2 Neck & middle
Position 3 Middle
Position 4 Middle & bridge
Position 5 Bridge pickup

1 Full-size Humbucker (HG)/Coil tap
Pulling up on the volume pot shuts off the coil closest to the bridge

2 Single Coils/1 HG Humbucker/5-way switch
Position 1 Neck pickup
Position 2 Neck & middle
Position 3 Middle
Position 4 Middle & bridge
Position 5 Bridge pickup

1 Mini Humbucker/1 Single Coil/3-way switch
Position 1 Neck
Position 2 Neck & Bridge
Position 3 Bridge

3 Mini Humbucker/5-way switch
Position 1 Neck pickup
Position 2 Neck & middle
Position 3 Middle
Position 4 Middle & bridge
Position 5 Bridge pickup

2 Vintage Alnico Humbuckers/5-way switch
Position 1 Neck pickup
Position 2 Inside coils of neck and bridge in parallel
Position 3 Neck pickup with inside coil of bridge
Position 4 Inside coils of neck & bridge in series
Position 5 Bridge pickup
Bridge
Bridge Stoptail Aluminum (fully-adjustable) or Taylor Tremolo
Nut
Bone
Machine Heads
Taylor Standard Tuners
Hardware
Chrome
Pickguard
White Pearloid
Black Pearloid
Tortoise
Black
Parchment
Aged White Pearloid
Scale Length
24.875'' (633 mm)
Width at Nut
1 11/16''
Fretboard Inlays
4mm mother-of-pearl dots
Fretboard Binding
Black
Strings
Electric Light gauge Nanoweb® coated Elixir® strings (.010 - .046)
Case
Deluxe Hardshell Case for SB1-X, Gig Bag for SB2-X

Beograd

Admirala Geprata 10
+381 11 7617 400; 10-18h

Novi Sad

Sutjeska 2, SPC SPENS
+381 21 450 800; 10-20h

Niš

Obrenovićeva BB, TC Kalča
+381 18 250 670; 10-18h

Veleprodaja

Admirala Geprata 10, Beograd
+381 11 7617 500; 08-16h