CENA ZA KOMAD!
The JRX112M was designed from the ground up as a stage monitor. It's a 250-watt (program, 1,000W peak) 12 in. two-way stage monitor in a compact enclosure also featuring the dual-angle pole socket. Voiced to perfection, it cuts through to allow performers to hear everything they need for a pro performance.
Neutrik, Speakon, and 1/4 in. input connectors
Constructed of carpet-covered, 3/4 in. MDF - a material that is structurally and acoustically superior to the particleboard
Heavy gauge wire is used for inductors
SonicGuard high-frequency driver protection
Dual-angle pole socket [ for conventional vertical position, or with a 10 degree down angle]
All metal handles
18-gauge, full metal grille
All JRX100 models have passed the same 100-hour, full rated-power torture test that JBL high-end touring systems must survive.
Technical Description
Specifications
Frequency Range (-10dB): 60Hz - 16kHz
Frequency Response: (3dB): 70Hz - 12kHz
Sensitivity (1W/1m): 99dB SPL
Nominal Impedance: 8 Ohms
Power Capacity (continuous, 100-hour power test): 250 Watts
Peak Power Capacity: 1000 Watts
Recommended Amplifier Power: 250 Watts to 500 Watts into 8 Ohms
Maximum SPL: 129dB
Nominal Dispersion: 90 degrees x 50 degrees
Crossover Frequency: 1.8kHz
High Frequency Driver: JBL 2412 1 in. exit compression driver mounted on Progressive Transition Waveguide
Low Frequency Driver: JBL M112-8
Input Connector: Neutrik, Speakon, NL-4 (x1); 1/4 in. TS phone jack (x1); parallel
Dimensions: 22.5 x 15.5 x 12.5 in. (572 x 293 x 318 mm)
Weight: (19.5 kg)